Cars & parts

All models and accessories are made to 1/32nd scale unless stated otherwise.

MRRC cars, chassis and products are compatible with all the recognised International standard of 1/32 or 1/24 scale Slot Car race systems from past and present operating between 9 to 15 volts direct current (DC).

The latest MRRC cars now comes fitted with the all new “333” open can motor ready to race also on ARTIN 1:32, CARRERA Evolution, NINCO, RACY 1:32, SCALEXTRIC Sport, SCALEXTRIC Start, SCX The Original System, SUPERSLOT and similar 1/32 scale slot race sets.

Braid settings

For best performance results correct braid setting is most important. The contact braids on the car must match with the power rails of the track the car is raced on. Due to the different type of track also the position of braid setting can vary. For a correct positioning the braids can easily be adjusted:

When power track rails are positioned NEAR beside the slot, also the braids must be positioned NEAR both sides at end of the guide.

When power track rails are positioned WIDE beside the slot, also the braids must be positioned WIDE offset both sides at end of the guide.

If needed the contact area of braids can be enlarged by pushing the braid ends - of fixed braid inside the guide - forwards in driving direction.

Take care that braid is never too long. It is important that the braid ends can’t touch to avoid short circuit.
 
For a perfect current consumption on all track circuits and style of racing different type of braid is available.

Driving direction

In some instances it may be found that a car travels in the opposite direction on a track compared to other cars. It is a simple matter to correct this by doing the following: The 2 wires that go to the guide on the car can be swapped over.

To make this easier the chassis can be removed from the car body by unscrewing the fixing screws. Please keep these screws in the order that they were removed as some cars may have different length screws.

Chassis magnet

Cars and chassis supplied with anti-slip traction magnet (A) have improved road holding. Chassis magnet can be moved to alternative positions (B). Alternatively magnets can be removed (C) from the chassis to increase skill level for driver. Klick on pictures to enlarge.

Chassis magnets will not work in combination with power rails made of non magnetic materials. When racing original equipped cars without chassis magnet (or racing cars with chassis magnet on non magnetic power rails) a reduced voltage between 9 to 12 volts is recommended.

General

All items are primarily designed and developed for adult use and not suitable for children under 14 years of age due to small components and parts.
MRRC cars and chassis can be used in combination with all standard type track, but some specialist track like obstacle or off road sections etc. may be impassable. Original equipped MRRC cars and accessories may not be suitable for use in conjunction with “digital” track systems.
ARTIN, CARRERA, NINCO, RACY, SCALEXTRIC, SCX, SUPERSLOT are registered trademarks of their respective companies.

MRRC reserves the right to alter designs, specifications and colours without prior notice. Pictures are for illustration only and may not conform exactly to production items. Sizes given are approximate. Product availability dates may be subject to amendment.